Strain Gages and Supplies for PressureTrace™

UPDATED 2024-11-07

With the closing of Recreational Software and the ending of the production of PressureTrace™, gages and accessories will still be needed for existing units.

I was the supplier of assembled gages to RSI, and for the foreseeable future I will continue to supply gages and limited supplies as needed, and will maintain RSI's old prices as long as I can.  

I can also supply "recovery files" if you scrog your unit.  See below  Note that I cannot do hardware repairs as I do not have any spare board components.

Please put "Gages" in your email's subject line for inquiries.. Orders will ship in the order they were received within 5 days of receipt of funds. 

At this time, prefer all payments  be by postal money order, certified check drawn on a US bank, or cash US$.  Checks and MOs will not be cashed until the order ships.  I'll consider a personal check if you contact me first, but I will hold the order until the check clears. Sorry for the inconvenience but I've been badly burned a couple of times to many and I've had trouble with a couple of PayPal payments in the past..

If you live in AZ and would like to pick it up your order in person and save the postage, that can be arranged.

Please Note

The old original PressureTrace Serial and PressureTrace USB (bricks) are no longer supported.
  Only PressureTrace II (packaged in the Pelican boxes) is supported

CURRENTLY IN STOCK                                                 When gage stock gets down to 5 gages I will order another batch for assembly

*  I currently have 2- 4 foot and 1- 3 foot cable in stock.  Additional replacement cables are currently unavailable due to a lack of a source for small quantities of the low capacitance, shielded cable. I'm trying to find a source for small quantities of the "Lapp 602603S, 26 AWG 3 Conductor, Shielded, Flexible Signal and Control Cable," that they are made from without spending  $1000+ for a huge quantity of the cable. 

PRICES  

3  Gages in sealed packaging          US$109
6 Gages in sealed packaging           US$196 (with a free glue)

Extra Strain Gage Glue                      US$ 5

Standard Length Jumpers (6")          US$5 ea or US$14.50 for 3

Custom Length Jumper                     Prices as above plus $1.50 per inch extra up to a max of 9".

Extra Velcro Straps                            US$2 each

Replacement Test Pen                      US$5 each

Replacement gage cables               4 ' US$37.95    3'  US$27.95)

Replacement PT Software CD         US$25 with the Module number. (1st class mail)  I can supply V5.05 for PTII and V4.2 for the really old old serial and USB PTIs

Upgrade for  older ShotingLab Software to V4.9 with old serial number (1st class mail) US$25  

I can also furnish printed manuals for PressureTrace™ and ShootingLab™  US$ 14.95 each (plus US$5.50 for US postal mail or  US$9.85 for Priority Mail Flate Rate.) Manuals are shipped separately. 

RECOVERY FILE

If you have "scroged" your unit and receive a "Not calibrated" or "Not setup" message, I can either email the recovery files to you, or mail you a CD with the necessary restore files ($5.00) .  I will need the serial number of your PT unit (on the white sticker on the panel).

CABLE UPGRADE

If you have an older unit with the phono jack type cable I can convert your unit, and your cable  to the newer Twist-Lok connector.  Cost is US$35 plus return Priority Mail insured postage  (US$26)

ORDERING

Orders and payment can be sent to:

John Schaefer
1365 S. Saddleback Dr.
Cottonwood, AZ 86326

Please include your correct, active email address

SHIPPING

All gages and accessories to domestic US addresses are shipped USPS Priority Mail Small Flat Rate Insured.

All international orders are shipped Priority Mail International flat rate.  Shipping and insurance varies depending on destination and will be quoted after the shipping address is known.  

No direct shipment to addresses in South America.

PRESSURETRACE™ TIPS & TRICKS

For some PressureTrace™ tips and tricks click here.

| Email me |

| Visit Fr. Frog's Website |

Updated 2024-11-07 @ 1300